Fabrication Oversight Supervisors (Electrical/SCADA)

Project Sunrise wind"

Work Location: New York - with a requirement to travel to numerous sites

Travel: 4 to 8 days per month

Pay Rate: Not Defined / need Candidate’s requested rate

Work Schedule: 40 hours

PD: $178 a day and all expenses paid and reimbursed for requested travel

Mob / Demob: $750

Duration: 6 months with extensions likely.

Position Details/Scope of Work:

"Main tasks – Support to fabrication

• Planning: The supervisor shall plan and align with the Fabrication Manager when to inspect the Turbine Foundations. Planning with other stakeholders is required both internally and externally.

• Align with HV cables department on layout and quantity of accessories:

• The supervisor shall get familiar with Array cables accessories and the layout for each Turbine Foundation.

• Align with SCADA department on antenna and cable installation and requirements:

• The supervisor shall get familiar with antenna layout and installation methods.

• Inspections with DIT (Digital Inspection Tool):

• The supervisor shall use the Digital inspection Tool software program to perform all inspections.

• Inspection of free issued items at fabrication yard:

• The supervisor shall, in collaboration with Foundation Contractor supervise the installation of free issued items, e.g. switchgears, electrical panels etc.

• Test on Completion, review of Electrical Test Certification, closing of punch lists:

• The supervisor shall review the Electrical Test Certification. When approved the supervisor shall conduct a full inspection walkdown (Test on completion) of the Turbine Foundation, by using DIT. Punch list(s) shall be submitted to Contractor and closed prior to loadout deadline.

Documentation responsibilities:

• Ensure all associated and relevant documentation is received, reviewed, and uploaded to the dedicated project document control system. E.g. test documents, delivery notes, incoming inspection reports, observation/NCR reports, photos, DIT reports etc.

• Reporting: Daily Provide Fabrication Manager with input to monthly reports regarding progress"

Education and Requirements:

• Electrical Engineering degree (preferred, not required)

• 3 - 5 years’ experience as Electrical Fabrication Supervisor            

• Site experience on fabrication yards, pre-assembly, or construction sites

• Strong communication skills and ability to work independently.

• Does not need experience on wind turbines. (Not mandatory)

Physical Requirements:

• Need to be physically fit.

• The job requires a lot of walking (“Walk at least 10K steps during a shift)

• Physical Requirements (if applicable) lift 50 lbs.,

• Working at heights between 10 - 30 feet.